5083 Aluminum Plate

5083 aluminum plate is one of the typical 5000 series aluminium sheets. Its main chemical compositions are aluminum and magnesium. Similar to 5052 aluminum and 5754 aluminum alloy sheet, 5083 aluminum also has good anti-corrosion performance. But its strength is higher than 5052 grade aluminum. With the development of aerospace industry and transportation, automobiles, ships and aircraft have become key vehicles in our daily life. Our aluminium 5083 plate plays a key role in transportation.

5083 Aluminum Plate
5083 Aluminum Plate

5083 Aluminum Plate

Aluminum Alloy No.: 5083

Main ingredients: Aluminium and Magnesium

Available Width(mm): 800-2500

Available Thickness(mm): 0.2-170

Tempers: O-H112

Sample Size: A4 Size

5 key features of CLIMB 5083 aluminum plate

5083 aluminium alloy is widely used aluminum sheets. Our customers has applied it for many uses. It is different from other 5000 series aluminum plates. Here are 5 features of CLIMB 5083 grade aluminum alloy plates.

  1. Aluminum 5083 alloy plate is hardened by hot rolling. It can produce “H” temper. Commonly, our 5083 h32 or h116 and h321 are popular. Besides, if you need soft O temper 5083 aluminum alloy plates, we can also provide for you.
  2. Aluminium 5083 has higher strength than 5052 aluminum sheet.
  3. 5083 grade aluminium has excellent corrosion resistance. For example, it can perform good resistance to fresh water, sea water, neutral inorganic salt solution and so on. Meanwhile, it is a good choice for you to use it for your ship building business.
  4. Aluminium alloy 5083 plate is suitable for using in low temperature. It can keep its properties under low temperature. While, there will be stress corrosion cracking. You had better not apply the 5083 alu exceed 65℃ to avoid the cracking.
  5. It is applicable for you to weld by various methods. At the same time, it has good extensibility.

5083 Aluminum Alloy Sheet

5083 Aluminum Alloy Sheet

Aluminum Alloy No.: 5083

Main ingredients: Aluminium and Magnesium

Available Width(mm): 800-2500

Available Thickness(mm): 0.2-170

Tempers: O-H112

Sample Size: A4 Size

What are the usages of 5083 aluminum plate for manufacturing business?

Aluminium alloy 5083 sheet is popular among our aluminium alloy plates. It has good strength. And you can apply our 5083 grade alu sheets on many fields. Lots of our customers uses it for stocking, transporting, construction, refrigeration devices, TELEVISION towers, drilling equipment, etc. Especially, our 5083 marine aluminum sheet has been used for making boats for many years.

Stocking and Transporting

Because of the corrosion resistance of 5083 aluminium alloy sheets, you can use it for stocking and transporting the gas, petroleum and so on. In addition, our 5083 aluminum also play a key role on high speed rail, subway, etc.

Car Manufacturing

Manufacturing car, 5083 is a good material for making truck lid and car pedal. Generally, making truck lid, it needs good elongation and large opening area. And 5083 aluminium plates has good wear resistance, corrosion resistance, elasticity and good impact resistance.

For the car pedal producing, you had better use material with high hardness. Our 5083 plate has low density and high strength. It can meets the requirements of car pedal making, prolonging the service life.

Ship Building

5083 aluminum plate is popular in marine industry. Its anti-corrosion is suitable for avoiding the seawater corrosion. At the same time, the good forming performance helps you process the 5083 plate for better boat producing. For your information, there are also 5052 aluminum sheets, 5086 aluminium plate and some other aluminum alloys for you to build boat.

Climb 5083 Aluminum for Ship Building
Climb 5083 Aluminum for Ship Building


Which types of 5083 aluminum plate are applicable for marine industry?

Utilizing 5083 aluminum sheets for making boat, it can reduce the boat weight with high strength. Moreover, there are also 5083 O temper, h111, h112, h321 and h116 aluminum plates are also applicable for you to make ship.

Generally, for your boat making business, CLIMB provides 5083 h116 and 5083 h321 aluminum sheets for you. These two tempers are commonly used for ship building among our customers. The h116 and h321 have better corrosion resistance than h111 and h112 temper. For example, when you apply the aluminum 5083 alloy under water environment, the h116 and h321 are more suitable than 5083 h111 and 5083 h112.

As a professional 5083 aluminum plate supplier, CLIMB can offer you 5083 marine aluminum sheets with CCS certifications. Meanwhile, we can also accept the third-part test for checking the aluminum sheet quality.

Packed 5083 Aluminum in Warehouse
Packed 5083 Aluminum in Warehouse

Packed 5083 Aluminum in Warehouse

Aluminum Alloy No.: 5083

Main ingredients: Aluminium and Magnesium

Available Width(mm): 800-2500

Available Thickness(mm): 0.2-170

Tempers: O-H112

Sample Size: A4 Size

Reasons for you to use 5083 h116 and 5083 h321 aluminium sheet for boat building

Making aluminium boat is a popular usage of our aluminium magnesium sheets. Whether for our 5083 aluminium, 5052 aluminium sheets, 5754 aluminium or some other aluminium alloys. It is applicable for you to use them in your marine industry. Especially, our 5083 h116 aluminium sheets and 5083 h321 aluminium plate are special used in marine boat building. Here are some reasons.

  • Aluminium 5083 has good toughness. It can help you resist impacts when sailing in the sea. Compared with fiberglass, it has better effects. For example, using fiberglass for making boat, it will be break if there is impact. While, utilizing the 5083 aluminum alloy plate, there will only be some mark here.
  • It has lighter weight and higher strength than steel. Because of the light weight, it will be easier to sail through water rather than steel boat. Meanwhile, it is also available to use aluminium sheets in the construction of superstructures of some steel boat. This will be helpful for increasing the stability of steel boat.
  • Using aluminium 5083 sheets for ship building, you can recycle the aluminum boat. Aluminum scrap is valuable. You can utilize the aluminium scrap. But if you use fiberglass for your ship making business, you will need to pay some recycling fee for recycling your fiberglass boat. Thus, there are more and more boat making company choose aluminium for business.
5083 Aluminum Plate for Boat Making
5083 Aluminum Plate for Boat Making


What is aluminium 5083 price per kg?

Buying 5083 aluminum sheets, you can get affordable price from CLIMB Aluminium Co., Ltd. There are different tempers for you to choose. We have 5083 O, h111, h112, h116, h321, h32, h34, h24, h22, etc. You can choose according to your requirements. Besides, we can provide 5083 aluminium sheets with different thickness and width.

Generally, the width will influence the 5083 aluminum sheet prices. We can provide 1200mm, 1250mm, 1500mm, 2000mm, 2200mm, etc. For example, the wider the aluminum sheets, the higher the price. While, it is worthy to mention that our aluminum plates width can reach 2200mm. It is rare among aluminum sheets suppliers. For your information, if you need 5083 marine grade aluminum plates, the price will be higher than other tempers of 5083 aluminum alloy. As for the thickness, it is between 0.5mm and 170mm. If you need the 5083 aluminium plate price of your width and thickness, please contact us for the latest price.

5083 Aluminium Magnesium Plate
5083 Aluminium Magnesium Plate

5083 Aluminium Magnesium Plate

Aluminum Alloy No.: 5083

Main ingredients: Aluminium and Magnesium

Available Width(mm): 800-2500

Available Thickness(mm): 0.2-170

Tempers: O-H112

Sample Size: A4 Size

Why choose CLIMB 5083 aluminum plate supplier?

It is key for you to choose a suitable 5083 aluminum plate supplier for your business. We have rich experiences in manufacturing and trading for about 10 years. Our professional attitude and rich experience make sure our quality and reputations. Whether for the quality, after-sale service and the company qualification, we are reliable 5083 aluminum supplier.

Good Quality

Our factory has complete production line for manufacturing aluminum sheets. Our 5000 series aluminum plates has great advantages. We can provides 5083 grade aluminum with various widths, thicknesses and tempers. Moreover, we will test the finished aluminium plates for making sure the quality. And we can offer products certifications for you. Besides, it is an important thing to pack the 5083 aluminum products well. Our company uses meticulous packaging for bagging your aluminum plates. You do not need to worry about the quality

Good After-sale Service

After you get our 5083 aluminum sheets, our sales will continue following your order. Whether you have any questions about our aluminum sheets products, our sales will help you solve problems patiently. Meanwhile, if you want to put new order, you can get discount.

Excellent Company Qualification

Our company been cooperated with many influential enterprises at home and abroad. For example, we have established long-term cooperation with COFCO, Shanghai United Can Co., Ltd. and so on. Besides, we also have certifications of aluminum sheets for proving our quality. If you need, it is also applicable to invite third-party detection institution for testing.

    * Your Name

    * Your Email
    Your Phone Number (Include the area code)

    Your Country




    *We respect your privacy, and will not share your personal information with other entities.